Kohler Electric Shower User Manual download pdf (Page 12)

9. Do not install the appliance in a position where it may become frozen. The

shower unit must not be fitted where it may be exposed to freezing conditions.

The shower unit must not be used if you suspect it may be frozen.

10. We recommend that a non-restrictive (free-flowing) isolating valve is fitted in the

cold water supply pipe to allow the complete maintenance of the appliance. Do

not use a valve with a loose washer plate (jumper) as this can lead to a build up

of static pressure.

11. To avoid damage to the case when soldered fittings are used, pre-solder the

pipework and fittings before connecting them to the inlet stub.

12. Supply pipework MUST be flushed to clear debris before connecting the

appliance.

13. The appliance is fitted with a 1/2" BSP male outlet thread, to accept a Mira Zest

shower hose.

14. When installed in very hard water areas (above 200 ppm temporary hardness)

your installer may advise the installation of a water treatment device, to reduce

the effects of limescale formation. Appliance malfunction due to excessive

limescale formation is not covered by the manufacturer’s guarantee. Your local

water company will be able to advise on the hardness of water in your area.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

No comments

Kohler Electric Shower User Manual Page 12