Kohler Electric Shower User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
4
Important Safety Information
WARNING!
1. Products manufactured by us are safe and risk-free, provided that they are
installed, used and maintained in good working order, in accordance with our
instructions and recommendations.
2. THIS APPLIANCE MUST BE EARTHED.
3. In accordance with ‘The Plugs and Sockets etc. (Safety) Regulations’ in force
at the time of installation, this appliance is intended to be permanently
connected to the fixed electrical wiring of the mains system.
4. DO NOT twist the individual cable cores of the live and neutral conductors, as
this will prevent them from entering the terminal block.
5. Make sure that any pipework that could become frozen is properly insulated.
6. DO NOT operate this appliance if it is frozen. Allow the appliance to thaw before
using. The shower unit must not be fitted where it may be exposed to freezing
conditions.
7. DO NOT fit any form of outlet flow control as the outlet acts as a vent for the tank
body. Only Mira Showers recommended outlet fittings should be used.
8. If water leaks from the pressure relief valve, maintenance will be required
before the appliance can be safely used.
9. There are no user-serviceable components beneath the cover of the appliance.
Only a competent tradesperson should remove the cover.
10. If any of the following conditions occur, isolate the electricity and water supplies
and refer to To contact us, on the back page of this guide.
The cover is not correctly fitted and water has entered the appliance case.
The case is damaged.
The appliance begins to make an odd noise, smell or smoke.
The appliance shows signs of a distinct change in performance, indicating
a need for maintenance.
The appliance is frozen.
11. Isolate the electrical and water supply before removing the cover.
12. Mains connections are exposed when the cover is removed.
13. Refer to the wiring diagram before making any electrical connections.
14. Ensure all electrical connections are tight, to prevent overheating.
15. This product is not suitable for areas with very high humidity (i.e steam rooms).
Please consult your installer.
Page view 3
1 2 3 4 5 6 7 8 9 ... 43 44

Comments to this Manuals

No comments