Kohler K-R9245-CP Use and Care Manual download pdf (Page 5)

Operation

Set your music device to a midrange volume before connecting to the wireless speaker.

Press the power button for 1 second to power the wireless speaker ON or OFF.

The light will blink blue to indicate pairing mode.

Pair with your BLUETOOTH

device. If a password is required, enter ″0000.″ The light will turn

solid blue when connected.

NOTE: If pairing is lost, the wireless speaker will power OFF after 90 seconds.

Use the USB cable provided to recharge.

LED Status – Operating Mode

Blue blink = BLUETOOTH pairing mode

Blue = Connected to a BLUETOOTH device

Blue/red blink = Connected to a BLUETOOTH device. Battery is low.

LED Status – Charging Mode

Red blink = Battery is charging

Red = Battery recharge is complete

Care and Cleaning

For best results, keep the following in mind when caring for your KOHLER product:

•

Use a mild detergent such as liquid dishwashing soap and warm water for cleaning. Do not use

abrasive cleaners that may scratch or dull the surface.

•

Carefully read the cleaner product label to ensure the cleaner is safe for use on the material.

•

Always test your cleaning solution on an inconspicuous area before applying to the entire surface.

•

Do not allow cleaners to sit or soak on the surface.

•

Wipe surfaces clean and rinse completely with water immediately after cleaner application. Rinse

and dry any overspray that lands on nearby surfaces.

•

Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring

pad to clean surfaces.

For detailed cleaning information and products to consider, visit www.kohler.com/clean. To order Care &

Cleaning information, call 1-800-456-4537.

Power/LED

USB Input

5VDC, 1.2 A

Kohler Co. 5 1199729-5-A

1 2 3 4 5 6 7 8 9 10 ... 23 24

No comments

Kohler K-R9245-CP Use and Care Manual Page 5