Kohler K-1167-GVL-K4 Installation Guide download pdf (Page 16)

11. Complete the Finished Walls

Cover the framing with water-resistant material.

Provide suitable access to the control ampliﬁer.

Install the ﬁnished wall and deck materials.

Drill a 5/8″ (16 mm) hole through the wall material where the user interface will be installed. Refer

to the ″Plan the Installation″ section for the recommended location.

Route the user interface cable through the hole in the wall material, and tape or otherwise secure

the cable so it will not fall between the walls.

Seal the joints between the bath rim and the ﬁnished wall with silicone sealant.

Install the faucet trim.

Concrete Construction

Apply mortar and tile to the wall and surround material as needed. Install tile to within 1/4″ (6

mm) of the bath deck, making sure the tile covers the screw heads in the ﬂange.

Apply a bead of silicone sealant where the tile meets the bath surface.

Install the faucet trim.

Water-Resistant

Wallboard

5/8" (16 mm) User Interface Hole

Finished Material

Apply silicone

sealant.

Silicone

Sealant

24"

(610 mm)

10"

(254 mm)

1212245-2-B 16 Kohler Co.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 75 76

No comments

Kohler K-1167-GVL-K4 Installation Guide Page 16