Kohler KD165 User Manual Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 14
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
s example
1.
88
- Optionally this shortly appears
2.
ap
- Acoustic Piano CD player
3. - First digit of CD player Main controller firmware version, (M) 3 in this example
4.
26
- Second two digits of CD player Main controller firmware, 26 in this example
5.
ad
- MIDI processor header (AD)
6.
34
- Second two digits of MIDI processor firmware, 34 in this example
7.
g1
- Solenoid rail controller firmware version first digit, (G) 1 in this example
8.
42
- Solenoid rail controller firmware version second two digits, 42 in thi
9.
88
- End of Power ON Display sequence, the display test, all segments are enabled
15
THE POWER ON DISPLAY SEQUENCE OF THE DIGITS TRANSLATES TO THE FIRMWARE
VERSION AS FOLLOWING:
TO IDENTIFY CURRENT VERSIONS OF FIRMWARE IN YOUR KOHLER KD PLAYER SYSTEM:
You may be asked by the technical support or piano technician to identify the version of your
Kohler KD Player firmware.To identify installed firmware please follow these instructions:
- If your KD165 is turned on, turn it OFF first and wait about 30 seconds.
- Turn ON the KD165.
- Observe the Power ON sequence of the digits on the KD165 display.
is sequence will begin to display immediately aer turning the Power supply on, it is recommended
to have the pencil and paper handy to note the sequence of the digits.
e version of the firmware as per the example above is:
CD player main controller v 3.26
Midi processor : v34
Solenoid rail controller : v 1.42
Page view 13
1 2 ... 9 10 11 12 13 14

Comments to this Manuals

No comments