Kohler K-7421-NA Instruction Manual download pdf (Page 5)

1. Install the Remote Control Dock

IMPORTANT! Carefully set the small screws in the screw pack

aside. They will be used in a later step.

Position the back plate at the installation location, tab on the

upper right corner.

Conﬁrm the back plate is level. Mark the location of the screw

holes on the wall using the mounting plate as a template.

Drill a 3/16″ hole at each mark. Install the provided anchors.

Attach the back plate to the wall with the provided screws.

Position the docking station on the back plate.

Mark the location of the bottom holes.

Remove the docking station and drill a 3/16″ hole at each mark.

Install the provided anchors.

Position the docking station on the back plate.

Secure the docking station with the provided screws.

Attach the adhesive side of the pad to the docking station over

the screws.

Pad

Docking

Station

Back

Plate

Tab

Screw

Kohler Co. 5 1197250-2-B

1 2 3 4 5 6 7 8 9 10 ... 75 76

No comments

Kohler K-7421-NA Instruction Manual Page 5