Kohler COMMAND20=25HP User Manual download pdf (Page 15)

Storage

When the engine is not in use, use the following

storage procedure. Federal, state, or local laws

governing LPG fuel tank storage may also apply.

Follow the applicable storage laws.

Clean the exterior surfaces of the engine.

2. Change the oil and filter while the engine is still

warm from operation. See "Change Oil and Oil

Filter" on page

10.

3. Turn valve on LPG tank off and run engine until

the fuel system is empty. Turn ignition key switch

off. Separate LPG tank from the unit and store

separately in an area designated for safe LPG

tank storage. On dual-fuel units, the gasoline fuel

system must be completely emptied, or the

gasoline must be treated with a stabilizer to

prevent deterioration. If you choose to use a

stabilizer, follow the manufacturer's

recommendations, and add the correct amount for

the capacity of the fuel system. Fill the fuel tank

with clean, fresh gasoline. Run the engine for 2-3

minutes to get stabilized fuel into the carburetor.

Close fuel shut-off valve when unit is being stored

or transported.

Store the engine in a clean, dry place. Store the

fuel tank in a designated safe LPG storage area at

all times when not in use.

Parts Ordering

The engine Specification, Model, and Serial Numbers

are required when ordering replacement parts from

your Kohler Engine Service Dealer. These numbers are

found on the identification plate which is affixed to the

engine shrouding. Include letter suffixes if there are

any. See "Engine Identification Numbers" on page 6.

Always

insist on genuine Kohler

parts.

All genuine

Kohler parts meet strict standards for fit, reliability, and

performance.

Major Repair

Major repair information is available in Kohler Engine

Service Manuals. However, major repair generally

requires the attention of a trained mechanic and the

use of special tools and equipment. Your Kohler Engine

Service Dealer has the facilities, training, and genuine

Kohler replacement parts necessary to perform this

service. For Sales

Service assistance call

1-800-544-2444

(U.S.

Canada) or contact your

Kohler Engine Dealer or Service Distributor, they're in

the Yellow Pages under Engines-Gasoline.

4. Remove the spark plugs. Add one tablespoon of

engine oil into each spark plug hole. Install the

plugs, but do not connect the plug leads. Crank

the engine two or three revolutions.

Specifications

Model:

.................................................................................................

CH20-22

..........................................

CH25

Bore:

...................................................

(in.)

.................................

(3.03)

..........................................

83 (3.27)

Stroke:

.................................................

(in.)

.................................

67 (2.64)

..........................................

67 (2.64)

Displacement:

....................................

cm3

(in.3)

.................................

624 (38.1)

........................................

725 (44.0)

Power (03600

RPM):

.......................

(HP)

.................................

14.9 (20*)

.........................................

18.4 (25*)

Max.

Torque

(QRPM):

...................

N.m

(ft. Ib.)

.................................

(32) Q2500

................................

54 (39.5) Q2400

Compression Ratio:

............................................................................

8.5:l

.................................................

9.O:l

Weight:

.................................................

kg (Ib.)

.................................

(90)

.............................................

43 (94)

Oil Capacity (w/filter):

.....................

(U.S.

qt.)

.................................

(2.1)

..............................................

(2.1)

Lubrication:

.........................................................................................

Full Pressure w/full Flow Filter

Exhaust Emission Control System

for

models CH20

LP,

CH25

LP,

and CH25 Dual

Fuel

(open

loop) is

EM.

Exhaust Emission Control System

for

model

CH25 Dual Fuel (closed loop) is

EM, 02S,

ECM.

*Horsepower ratings are established in accordance with Society

Automotive Engineers

Small Engine

Test

Code

J1995

GROSS. Kohler Co. reserves the right

change product specifications, design, and standard equipment without notice and

without incurring obligation.

horsepower reduction

approximately 10 percent may

expected with the operation and

use

LPG as fuel.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Kohler COMMAND20=25HP User Manual Page 15

Comments to this Manuals

Related products and manuals for Engine Kohler COMMAND20=25HP