7.8
Section 7
Electrical System and Components
ȱ Řǯȱ ȱȱȱǰȱȱȱȱ
ȱśśŖȬŜŖŖȱǰȱȱȱǻǼȱȱǯ
ȱ řǯȱ ȱȱȱȱȱȱȱ¢ȱȱ
¢ȱȱȱȱ¢ǯ
ǯȱ ȱȱ¢ȱȱȱȱȱȱ
engine runs poorly, or existing plug condition
ȱȱȱǰȱȱȱ
spark plugs gapped at 0.76 mm (0.030 in.),
ȱȱȱǯȱȱȱ
ǰȱȱȱȱřǯ
ǯȱ ȱȱ¢ȱȱȱȱȱȱȱ
¢ȱȱȱǰȱȱĴȱǰȱ
ȱȱȱŚǯ
ǯȱ ȱȱȱȱȱȱ¢ȱȱ
ȱȱǰȱȱȱȱřǯ
Test 3. Check for Timing Advance
ȱ ŗǯȱ ȱȱȱȱȱȱȱȱĚ¢ȱȱ
with a marking pen, chalk, or narrow tape. See
ȱŝȬŝǯ
ȱ Řǯȱ ȱȱȱȱȱȱ¢ȱ
that had good spark.
Figure 7-7. Mark For Timing Advance.
ȱ řǯȱ ȱȱȱȱȱȱȱȱȱȱ
ȱȱȱȱȱȱȱǯȱȱȱȱ
ȱȱȱȱ¡ȱȱȱȱȱȱ
ǯȱȱȱȱĴȱȱȱȱ
movement of the line on the screen relative to the
ȱȱȱȱǯȱȱȱ¢ȱȱ
good spark, repeat the test on the other cylinder.
ȱȱŝȬŞǯ
Flywheel Screen Mark
Figure 7-8. Check For Timing Advance.
a. If the line on the screen moved away from
ȱȱȱȱȱȱȱ
ǰȱȱȱȱȱ
ȱȱ¢ȱȱȱȱȱ
¢ǯȱȱȱȂȱȱ¢ǰȱȱȱȱŚǯ
ǯȱ ȱ¢ȱȱȱȱȱȱȱȱ
¢ǰȱȱȱ¢ȱȱȱȱȱ
ȱȱȱşŖǚȱǯȱȱǰȱȱȱȱ
Śǯ
Test 4. Test the Ignition Modules and Connections
ȱ ŗǯȱ ȱȱȱȱȱȱǯȱ
ȱȱȱȱ¢ȱǰȱǰȱȱ
ǰȱȱǰȱȱȱǯȱȱ
that connections are oriented properly on
terminals of modules.
ȱ Řǯȱ ȱȱȱȱȱȱǻǼȱ
ȱȱȱȱȱȱǻȱȱǼȱ
with aerosol electrical contact cleaner to remove
any old dielectric compound, dark residue, dirt,
ȱǯȱȱȱȱȱ
leads from the spark plugs.
ȱ řǯȱ ȱȱȬǰȱȱȱȱȱȱ
ȱȱȱȱȱǻǼȱȱ
ȱȱȱȱǻȱȱȱȱǼǰȱ
and a known good ground location on the
engine.
ȱ Śǯȱ ȱȱ¢ȱȱȱȱȱȱȱ
ȱȱŗŘȱȱȱȱȦȱǻǼȱȱ
ȱȱȱȱǯȱȱȱȱ
ȱȱȱȱȬȱȱȱȱřǯ
ǯȱȱ ȱȱȱȱȱȱȱȱȱȱ
ȱȱȱǰȱȱȱěȱ
module.
ǯȱ ȱ¢ȱȱȱȱȱDzȱȱȱ
ȱę¡ȱȱǰȱȱǯ
Comments to this Manuals