Kohler K-T134-4D-CP Installation Guide download pdf (Page 4)

1. Install the Spout

Remove the temporary nipple.

For the 4-7/8″ (12.4 cm) diverter spout: Apply thread sealant to a

1/2″ NPT nipple and install it to the bath elbow so it extends

7/16″ (1.1 cm) beyond the ﬁnished wall.

For the 7-3/4″ (19.7 cm) diverter spout: Apply thread sealant to a

1/2″ NPT nipple and install it to the bath elbow so it extends

1/2″ (1.3 cm) beyond the ﬁnished wall.

For the 7-3/4″ (19.7 cm) non-diverter spout: Apply thread sealant

to a 1/2″ NPT nipple and install it to the bath elbow so it extends

6-1/4″ (15.9 cm) beyond the ﬁnished wall.

Apply a bead of plumbers putty or other sealant around the inlet

end of the spout according to the manufacturer’s instructions.

Apply thread sealant to the nipple, and install the spout to the

nipple.

Carefully tighten with a clean strap wrench.

Remove excess putty.

1/2" Nipple

7/16"

(1.1 cm)

1/2"

(1.3 cm)

6-1/4"

(15.9 cm)

Apply

plumbers

putty.

4-7/8" (12.4 cm)

Spout

7-3/4" (19.7 cm)

Non-Diverter

Spout

7-3/4" (19.7 cm)

Diverter Spout

Apply plumbers putty.

114497-2-CC 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 23 24

No comments

Kohler K-T134-4D-CP Installation Guide Page 4