Kohler K-1913-LW-47 Installation Guide download pdf (Page 30)

17. Adjust the Bath Door

All Installations

Check and Adjust the Door Movement

Move the bath door up and down several times with one ﬁnger. Check for uneven movement,

rubbing, or shaking.

If the door shimmies or racks, adjust one or both of the mounting brackets inward using the blue

screws and slots, until they are snug against the rollers.

If the door shimmies more when it is fully lowered, adjust the bottom of each mounting bracket

inward using the top screw as a pivot point.

If the door shimmies more when it is fully raised, adjust the top of each mounting bracket inward

using the bottom screw as a pivot point.

NOTE: When properly adjusted the door should move up and down using one ﬁnger.

Adjust roller

and mounting

bracket contact.

Lift and lower door several

times with one finger to

establish smooth travel.

Mounting Bracket

Red

Screw

Proper Bumper Adjustment

Bumper

Adjust the limit switches.

Adjust the bumper pads.

Improper Adjustment

(Blue Boot is not Visible)

Limit Switch

Proper Adjustment

(Blue Boot is Visible)

Latch Pin

(Centered)

Blue

Boot

Screw

Strike

Plate

Tighten

nut.

Blue

Screw

Pulley

Assembly

1128532-2-G 30 Kohler Co.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 155 156

Comments to this Manuals

No comments

Kohler K-1913-LW-47 Installation Guide Page 30

Comments to this Manuals