Kohler COMMAND PRO CS Series User Manual download pdf (Page 4)

Figure 1. Location of Controls and Service Points on CS Engines.

Oil Recommendations

Using the proper type and weight of oil in the crankcase

is extremely important. So is checking oil daily and

changing oil regularly. Failure to use the correct oil, or

using dirty oil, causes premature engine wear and

failure.

Oil Type

Use high quality detergent oil of API (American

Petroleum Institute) service class SG, SH, SJ or

higher. Select the viscosity based on the air

temperature at the time of operation as shown in the

following table.

NOTE: Using other than service class SG, SH, SJ or

higher oil or extending oil change intervals

longer than recommended can cause engine

damage.

A logo or symbol on oil containers identifies the API

service class and SAE viscosity grade. See Figure 3.

Fuel Tank Cap

Air Cleaner

Cover Retaining

Knob

Fuel Tank

Choke Lever

Fuel

Shut-Off

Retractable Starter

Throttle Lever

Oil Sentry

Light

On/Off Switch

(some models)

Muffler Shield

Muffler

Spark Plug

Carburetor

Oil Drain

Valve Cover

Oil Fill/

Check Plug

Synthetic oils should not be used.

Figure 2. Viscosity Grades Table.

Figure 3. Oil Container Logo.

Refer to “Maintenance Instructions” beginning on

page 8 for detailed oil check and oil change

procedures.

1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments

Kohler COMMAND PRO CS Series User Manual Page 4

Comments to this Manuals

Related products and manuals for Garden tools Kohler COMMAND PRO CS Series