Kohler 13ERG User Manual download pdf (Page 11)

IntroductionTP-6335 9/04

Section 1 Introduction

All information in this publication represents data

available at the time of print. Kohler Co. reserves the right

to change this literature and the products represented

without incurring obligation.

The safe and successful operation of a mobile power

system depends primarily on the installation. Use this

manual as a guide for installing the mobile generator set.

Refer to the operation manual for operating instructions.

1.1 Installation Standards

Mobile generator set installations must comply with the

Kohler detailed installation instructions following and

state and local requirements.

The installer is responsible for improper installations

resulting in penalties from noncompliance with California

Air Resources Board (CARB) or Environmental

Protection Agency (EPA) emission standards as well as

state and local requirements.

1.2 Generator Set Specifications

Refer to the model’s specification sheet for details. Use

the spec sheet as a guide for planning the installation.

Use the current dimension drawing and wiring diagrams.

1.3 Generator Set Operation

After the installer attaches the generator set to the

vehicle’s frame and makes connections, do the following

to make the generator set operational:

D Attach the exhaust system

D Add radiator coolant

D Add oil to the engine crankcase until the dipstick

indicates full

D Connect the fuel inlet and fuel return lines (for

gasoline models) or fuel inlet line (for LP models)

D Connect the remote switch, if equipped

D Connect the load leads

D Connect the battery terminals

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

No comments

Kohler 13ERG User Manual Page 11