Kohler Generator Sets 20--2800 kW User Manual download pdf (Page 51)

TP-5700 7/93 39Section 7 Electrical Requirements

7.9 Remote Emergency Stop

Switch

The emergency stop switch allows immediate shutdown

of the generator from a remote location. If the

emergency stop switch is activated, the emergency stop

lamp on the generator controller lights and the unit shuts

down immediately. The generator cannot be restarted

until the emergency stop switch is reset. See

Figure 7-8.

GENERATOR

EMERGENCY

STOP

PULL TO

BREAK

GLASS

Figure 7-8 Remote Emergency Stop Switch

7.10 Dry Contact Kit

The dry contact kit allows monitoring of the standby

system and/or the ability to activate accessories from a

remote location. Customer- provided warning devices

(lamps, horns, etc.) can be connected to any of the

generator controller’s alarm/indication outputs, allowing

the user to “customize” an alarm system to their needs.

7.11 Wiring

Connections between the components of a standby

generator system differ based on the type of equipment

used, options, and installation. Figure 8-6 on the

following page gives examples of the possible options

and wire connections necessary to make a standby

system operational. You should always refer to the

wiring diagram for details regarding wire sizing, location,

and number.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56

No comments

Kohler Generator Sets 20--2800 kW User Manual Page 51