Kohler Power Systems 14/20RESA User Manual download pdf (Page 38)

TP-6804 12/1138 Section 3 RDC2 Controller Operation

3.11 Generator Metering Menu

The generator metering menu displays the generator

voltage and frequency. See Figure 3-12.

Voltage Calibration

Hazardous voltage.

Will cause severe injury or death.

This equipment must be installed and

serviced by qualified electrical

personnel.

DANGER

The voltage calibration mode can be entered from the

Generator Metering menu. Contact a Kohler-authorized

distributor/dealer for service.

The Reset Calibration menu allows you to set the

voltage reading back to the original value after

calibration, if necessary. See Figure 3-12.

Generator ---->

Metering

Reset

Calibration

<---- Return

Reset

Calib? No

Volts:

123V

tp6804

Reset

Calib? Yes

Frequency:

12.3 Hz

Figure 3-12 Generator Metering Menu

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 71 72

14/20RESA 1
14/20RESAL 1
Operation 1
Controller Identification 2
Engine Identification 2
Table of Contents 3
Table of Contents, continued 4
TP-6804 12/116 6
Accidental Starting 7
Engine Backfire/Flash 8
Exhaust System 8
Fuel System 9
Hazardous Noise 9
Hazardous Voltage/ 9
Moving Parts 9
Heavy Equipment 10
Hot Parts 10
Introduction 11
Nameplate 12
Emission Information 12
Service Assistance 13
RDC2 Controller Features 16
DC2 Controller Features 17
1.7 Accessories 18
1.8 Service Views 19
2.1 Prestart Checklist 21
2.3 Generator Set Operation 21
RXT Transfer Switch 22
RDT or RSB Transfer Switches 22
2.4 Exercise 23
2.5 Faults 24
Fault Shutdown 25
Switch Controller 29
3.2 Controls and Indicators 29
3.2.1 Controller Keypad 30
3.2.2 LED Indicators 30
3.2.3 LCD Display 31
3.3 Controller Power 32
3.4 Battery Charging 32
3.5 Changing Settings 32
3.6 Setting the Exerciser 34
3.7 RDC2 Controller Menus 36
3.8 Main Menu 36
3.9 Overview Menu 37
3.10 Engine Metering Menu 37
3.11 Generator Metering Menu 38
3.13 Genset Run Time Menu 39
3.14 Genset System Menu 40
3.15 ATS Status Menu 41
3.16 ATS Configuration Menu 42
3.17 Date and Time Menu 43
Submenu (OnCue Password) 45
3.18.3 RBUS Information 46
3.18.4 Remote Devices Submenu 47
3.19 Programmable Interface 48
Module (PIM) Status Menu 48
3.21 Event Log 50
4.2 Controls and Indicators 51
4.2.1 Controller Keypad 52
4.2.2 LED Indicators 52
4.3 Controller Power 53
4.4 Battery Charging 53
4.5 Exercise 54
4.6 Event Log 54
4.7 Maintenance Timer 55
4.8 OnCue Password 55
5.1 Scheduled Maintenance 57
5.2 Lubrication System 60
5.2.6 Oil Cooler 20RESA/RESAL 61
5.3 Spark P lugs 62
5.4 Air Cleaner Service 62
1. Knobs (qty.2) 63
2. Cover 63
3. Paper element 63
5.5 Cooling System 64
5.6 Exhaust System 64
5.7 Battery 65
5.8 Storage Procedure 66
Section 6 Troubleshooting 67
6.5 Troubleshooting 68
Appendix A Abbreviations 69
TP-6804 12/11 72

Comments to this Manuals

No comments

Kohler Power Systems 14/20RESA User Manual Page 38

Comments to this Manuals