Kohler Power Systems 14/20RESA User Manual Page 40
- Page / 72
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
TP-6804 12/1140 Section 3 RDC2 Controller Operation
3.14 Genset System Menu
The genset system menu displays the system
information shown in Figure 3-15. Generator sets are
factory set and should not require changes to the system
settings in the field.
A Kohler authorized distributor or dealer can adjust
these settings, if necessary. If the generator set is
reconnected to a different voltage or the system settings
require adjustment for some other reason, see Section
3.5 for instructions to enable editing and change the
system settings.
Note: Use caution when navigating the controller
menus. In some menus, pressing the Select
button can enable editing of the c ontroller
settings. Changing the settings to incorrect
values can adversely affect generator set
operation or render the unit inoperable.
Voltage Regulator (VR) Voltage Adj
The generator set voltage is factory set and typically
does not require adjustment in the field. If voltage
adjustment is required, contact a Kohler authorized
distributor or dealer for service. Refer to the generator
set Installation Manual for instructions to adjust the
voltage.
Setting the Exerciser
Use the Genset System menus to set the generator set
exerciser. Refer to Section 2.4 for instructions to set the
exerciser and for more information about exercising the
generator set.
After a scheduled exercise run, the Next Exercise time
and date will be updated automatically based on the
Exercise Frequency setting.
Adjusting the Display Contrast
To adjust the display contrast, use the down arrow
button to step to the Contrast menu. Press the Select
button, and then use the up and down arrow buttons to
adjust the contrast. Press the Select button to save the
contrast setting.
tp6810
Genset ---->
System
System Voltage:
240 V
System Battery:
12 V
System Phase:
Single
<---- Return
Next Exercise
06:30p 15Dec2011
Exercise Freq:
Weekly
Exercise Mode:
Unloaded Variable
System Freq:
60 Hz
Meas System:
English
Contrast:
50
VR Voltage Adj:
240.0V
Figure 3-15 Genset System Menu
- 14/20RESA 1
- 14/20RESAL 1
- Operation 1
- Controller Identification 2
- Engine Identification 2
- Table of Contents 3
- Table of Contents, continued 4
- TP-6804 12/116 6
- Accidental Starting 7
- Engine Backfire/Flash 8
- Exhaust System 8
- Fuel System 9
- Hazardous Noise 9
- Hazardous Voltage/ 9
- Moving Parts 9
- Heavy Equipment 10
- Hot Parts 10
- Introduction 11
- Nameplate 12
- Emission Information 12
- Service Assistance 13
- RDC2 Controller Features 16
- DC2 Controller Features 17
- 1.7 Accessories 18
- 1.8 Service Views 19
- 2.1 Prestart Checklist 21
- 2.3 Generator Set Operation 21
- RXT Transfer Switch 22
- RDT or RSB Transfer Switches 22
- 2.4 Exercise 23
- 2.5 Faults 24
- Fault Shutdown 25
- Switch Controller 29
- 3.2 Controls and Indicators 29
- 3.2.1 Controller Keypad 30
- 3.2.2 LED Indicators 30
- 3.2.3 LCD Display 31
- 3.3 Controller Power 32
- 3.4 Battery Charging 32
- 3.5 Changing Settings 32
- 3.6 Setting the Exerciser 34
- 3.7 RDC2 Controller Menus 36
- 3.8 Main Menu 36
- 3.9 Overview Menu 37
- 3.10 Engine Metering Menu 37
- 3.11 Generator Metering Menu 38
- 3.13 Genset Run Time Menu 39
- 3.14 Genset System Menu 40
- 3.15 ATS Status Menu 41
- 3.16 ATS Configuration Menu 42
- 3.17 Date and Time Menu 43
- Submenu (OnCue Password) 45
- 3.18.3 RBUS Information 46
- 3.18.4 Remote Devices Submenu 47
- 3.19 Programmable Interface 48
- Module (PIM) Status Menu 48
- 3.21 Event Log 50
- 4.2 Controls and Indicators 51
- 4.2.1 Controller Keypad 52
- 4.2.2 LED Indicators 52
- 4.3 Controller Power 53
- 4.4 Battery Charging 53
- 4.5 Exercise 54
- 4.6 Event Log 54
- 4.7 Maintenance Timer 55
- 4.8 OnCue Password 55
- 5.1 Scheduled Maintenance 57
- 5.2 Lubrication System 60
- 5.2.6 Oil Cooler 20RESA/RESAL 61
- 5.3 Spark P lugs 62
- 5.4 Air Cleaner Service 62
- 1. Knobs (qty.2) 63
- 2. Cover 63
- 3. Paper element 63
- 5.5 Cooling System 64
- 5.6 Exhaust System 64
- 5.7 Battery 65
- 5.8 Storage Procedure 66
- Section 6 Troubleshooting 67
- 6.5 Troubleshooting 68
- Appendix A Abbreviations 69
- TP-6804 12/11 72
© 2020, manymanuals.com. All rights reserved. | 0.724 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals