Kohler Power Systems 14/20RESA User Manual download pdf (Page 45)

TP-6804 12/11 45Section 3 RDC2 Controller Operation

3.18.2 Networking Configuration

Submenu (OnCue Password)

The networking Configuration menu includes settings

used for communication with the Kohlerr OnCuet

Home Generator Management System.

For most applications, DHCP is enabled and the IP

settings cannot be changed from the controller keypad.

If DHCP is enabled, IP parameters are not displayed.

If DHCP is disabled (i.e., if a static IP address is

required), then the IP parameters can be modified. For

applications that require static IP addresses, press and

hold the select button to enable editing, disable DHCP,

and then step to the next parameters and enter the

information.

If an error occurs while setting a parameter, an error

message is displayed and then the controller exits the

edit mode. Previous settings are preserved.

Password

For the initial OnCue setup, you will be required to reset

the OnCue password on the RDC2 controller, and then

enter it into the OnCue software. To reset the password,

follow the instructions in Figure 3-21.

Note: The password is displayed for only 10 seconds.

Be sure to write down the password and serial

number.

A new password is generated each time the reset

password procedure is performed. If the password is

reset after the OnCue system has been set up, the

connection will be lost. Enter the new password in

OnCuer to reconnect.

tp6804

<---- Return

DHCP:

Enabled

Reset OnCue

Password

Reset OnCue

Password? No

S/N: 1234567

New PW: 12345

Press Select to enter YES

or NO as displayed. New

password is displayed for

approximately 10 seconds.

Networking

Configuration

HOLD

Reset OnCue

Password? Yes

UP arrow for YES,

Down arrow for NO.

Networking---->

Information

Networking---->

Status

Figure 3-21 Network Configuration Submenu

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 71 72

Comments to this Manuals

No comments

Kohler Power Systems 14/20RESA User Manual Page 45

Comments to this Manuals