Kohler K-1697 Installation Guide download pdf (Page 4)

1. Determine the Layout

WARNING: Risk of property damage. Allow a minimum of 12″ (30.5 cm) of air space between and

around all sides of the steam generators at all times. This provides an area for the heat generated

by the units to dissipate.

NOTICE: The steam generators will perform best when they are installed as close as possible to the steam

heads. Both units should be installed within 25’ (7.62 m) of the steam heads.

NOTICE: For optimum performance install the steam generators below the level of the steam heads.

NOTE: When possible, use 45 degree elbows. Performance will be increased when 45 degree elbows are

used.

Determine the location of the steam generators. Allow for a 12″ (30.5 cm) air gap on all sides of the

generator(s), and 12″ (30.5 cm) between them. Allow for a drain pan.

Choose a drain pan appropriate for your installation. The drain pan is not supplied.

Drain Pan

Tee

Steam Head

Control

Cable Input

Recommended In-Line

Water Filter

Water

Inlet

Shut-Off Valve

Install copper union

in water feed line.

Field Service Box

Water Feed to Steam Generator

Install copper union as close

as possible to steam generator.

Pressure Relief Valve

1053777-2-D 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 39 40

No comments

Kohler K-1697 Installation Guide Page 4