Kohler K-438-K-NA Installation Guide download pdf (Page 7)

4. Installation Checkout

Ensure that the valves are in the closed position. Turn the cold

valve fully counterclockwise. Turn the hot valve fully clockwise.

Turn on the main water supply.

Check the complete installation for leaks with the valves closed

and open.

Repair leaks as needed.

Close both valves and turn off the main water supply.

WARNING: Risk of personal injury. To prevent water spray,

wrap a cloth towel around the diverter before loosening the

diverter plug. Water will purge from the diverter when you

remove the diverter plug.

Wrap a cloth towel around the diverter, then carefully loosen the

diverter plug to remove pressure.

Retighten the diverter plug to the diverter.

Install a plaster guard (provided) over each valves and install the

cap (provided) over the diverter.

NOTE: Remove the cap from the diverter just before the spout from

the bath faucet trim will be installed.

Begin the bath faucet trim installation. Refer to the bath faucet

trim manufacturer’s instructions.

Cold

Cap

Plaster Guard

Close Hot

Diverter

Plug

Kohler Co. 7 1054252-2-B

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

No comments

Kohler K-438-K-NA Installation Guide Page 7