Kohler K-956-CP Installation Guide download pdf (Page 3)

1. Install the Spout

CAUTION: Risk of personal injury. Lines may be pressurized.

Do not lean over the pipe plug when turning or removing the

plug.

IMPORTANT! Keep the spout supply tube clean above the ﬁnished

deck to avoid damage to the O-ring seal.

Remove the plaster guards.

Remove the pipe plug from the supply stem, using a rag to

prevent spray as the plug is removed.

Back the setscrews off at the base of the spout until they are clear

of the supply tube.

Position the spout on the supply tube, and carefully press down

until the spout contacts the ﬁnished deck.

Align the spout as desired, and tighten the setscrews.

Slide the escutcheon down the spout until it is ﬂush with the

ﬁnished deck.

Spout

Escutcheon

Setscrew

Supply

Tube

Base

Pipe Plug

Finished

Deck

Kohler Co. 3 1009680-2-B

1 2 3 4 5 6 7 8 ... 15 16

No comments

Kohler K-956-CP Installation Guide Page 3