Kohler K-T72770-4-SN Installation Guide download pdf (Page 3)

1. Install the Valve Stem Adapter

NOTE: The plaster guard must be in place for these steps.

NOTE: The ﬁnished wall must be installed before you perform

these steps.

NOTE: If the plaster guard is inside the ﬁnished wall, the wall is

too thick for the installation and the valve needs to be moved

forward.

Take a straight object such as a pencil and hold it along the

outside edge of the plaster guard with the tip touching the

ﬁnished wall.

Either mark the spot where the top edge of the plaster guard and

the pencil meet or hold the pencil with your ﬁngers at that spot.

Move the pencil to the inside of the plaster guard. Touch the tip

of the pencil to the bottom of the plaster guard at the deepest

point next to the area labeled ″1.″

If the mark or your ﬁnger is below the edge of the plaster

guard, perform the remaining steps:

Finished

Wall

Measure to finished

wall with stick or pen.

Ramp

Plaster Guard

Max Finished Wall

Thickness

Spacers

(Thick Wall)

Spacer

(Medium Wall)

Spacer

(Thin Wall)

Kohler Co. 3 1204800-2-A

1 2 3 4 5 6 7 8 ... 31 32

No comments

Kohler K-T72770-4-SN Installation Guide Page 3