Kohler K-T72770-4-SN Installation Guide download pdf (Page 5)

2. Adjust the Handle Assembly

NOTE: Valve Operation. Water will ﬂow from a single shower

accessory when the control knob detent lines up with any of the

markings on the escutcheon. Water will ﬂow from two accessories at

the same time when the control knob detent is midway between the

markings.

Ensure the valve stem adapter is lightly placed over the spline

adapter.

Place the handle assembly over the valve stem adapter.

Turn on the water supply to the transfer valve.

Rotate the handle assembly until water begins to ﬂow through

the shower accessory.

Determine the shower accessory that will correspond to the

Accessory ″A″ setting at the 12 o’clock position on the escutcheon

for the 3-way installation or 4 o’clock for the 2-way installation.

Turn the handle to the detent setting that corresponds with

Accessory ″A.″ The handle should be in the 12 o’clock position

for the 3-way installation or 4 o’clock for the 2-way installation.

Repeat for each detent; verify ﬂow to each accessory.

Turn off the water supply to the transfer valve.

Remove the handle assembly and set aside.

To adjust for handle alignment:

Handle Assembly

Valve Stem Adapter

Mixed Water Supply

Spline Adapter

B + C

A + B

A + C

B + A

2-Way

3-Way

Kohler Co. 5 1204800-2-A

1 2 3 4 5 6 7 8 9 10 ... 31 32

No comments

Kohler K-T72770-4-SN Installation Guide Page 5