Kohler K-T72770-4-SN Installation Guide download pdf (Page 7)

3. Install the Trim

Firmly press the valve stem adapter onto the valve stem.

Secure the valve stem adapter to the valve with the correct length

screw, as selected in the ″Install the Valve Stem Adapter″ section

of this guide.

Align the holes on the front plate assembly and the valve.

NOTE: Be sure to select the correct length screw for your

application.

Secure the front plate assembly to the valve with two screws. Do

not overtighten.

Visually inspect the front plate assembly to ensure that the foam

seal is completely covering the wall opening. If not, stop the

installation and repair the wall opening.

Place the escutcheon against the wall. The drain holes in the

escutcheon should be positioned downward.

NOTE: If the handle does not engage the valve or the escutcheon

does not tighten to the wall, replace the valve stem adapter with an

adapter of appropriate length.

Care and Cleaning

For best results, keep the following in mind when caring for your

KOHLER product:

Screw

Handle Assembly

Escutcheon

Front Plate Assembly

Valve Stem Adapter

Screws

Kohler Co. 7 1204800-2-A

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

No comments

Kohler K-T72770-4-SN Installation Guide Page 7