Kohler TOILETS K-3378-EB User Manual

106423-0290SIPHON VORTEX LOW PROFILE ONE-PIECE TOILETSINTRODUCTIONThis service instruction will help you understand the operation

- 10 -the float valve may not be shutting off. Refer to the appropriate chart on the following pages.4. If the water level has dropped below the wate

- 11 -Toilet does not shut offand water is flowing intothe flush valve overflow.SYMPTOMS PROBABLE CAUSE CORRECTIVE ACTIONPoor flush. A. Low tank water

- 12 -SYMPTOMS PROBABLE CAUSE CORRECTIVE ACTIONTROUBLESHOOTING GUIDE FOR ROCHELLE AND PALARREPoor flush. A. Water pressure is below 25 psi.A. Increase

- 2 -K-3385-EB RochelleI.P.S. SUPPLYOF OUTLETFig. #6Fig. #4K-3378-EB Pillow TalkOF OUTLETI.P.S. SUPPLYFig. #7K-3397-EB San RaphaelI.P.S. SUPPLYK-3383-

- 3 -ROUGHINGIN AND INSTALLATIONCONSIDERATIONSKohler low profile, onepiece toilets are perfect for remodeling and new installations. Refer to the

- 4 -HOW TO REPAIR THE RIALTO, SAN RAPHAEL,CABERNET, AND PILLOW TALK FLOAT ANDFLUSH VALVE.INTRODUCTIONThe following instructions are used to replace t

- 5 -Old Style Flush Valve Fig. #13Trip ChainFlush BallFlapper HooksMounting HooksScrewscontrols flow at various water pressures. An antisip

- 6 - VOLUME CONTROL. If necessary, you can adjust theflow of water with adjusting screw. Decrease the flow byturning the screw downward or increase

- 7 -4. Place seat on toilet, centering the seat/cover bolts inbolt holes as shown in Fig. #17.French Curve Seat InstallationFig. #17BoltWasherNut5. A

- 8 -SERVICING THE PALARRE TOILET SEAT1. Insert the seat hinge bolts through the holes in the toiletbowl ledge and secure with two wing nuts as shown

- 9 -LUSTRA SEAT REMOVAL1. Refer to Fig. #24. Pry up seat hinge post covers andloosen screws. Remove wing nuts.Lustra Seat RemovalFig. #24Seat Hinge P