Kohler K-1151-LA-0 Installation Guide download pdf (Page 13)

Troubleshooting Procedure (cont.)

Symptoms Probable Causes Recommended Action

B. Jets are blocked. B. Remove blockage.

3. Whirlpool stops

automatically before 18

minutes.

A. The GFCI or ELCB trips. A. Identify source of fault, and

correct.

B. Suction blocked. B. Remove obstruction.

C. Jets are blocked. C. Remove blockage.

D. Motor overheated and protection

device activated.

D. Check for blockage at motor

vents. Remove blockage and

allow motor to cool.

Check for suction blockage.

Remove blockage and allow

motor to cool.

Check for jet blockage. Remove

blockage and allow motor to

cool.

4. Noisy operation. A. Pump banding straps have not

been cut. (Models with support

blocks only.)

A. Cut pump banding straps with

tin snips.

5. Heater does not operate.

(“H” models only)

A. No power to heater. A. Reset the GFCI or ELCB.

B. Water temperature exceeds 104° F

(40° C).

B. Allow water to cool and heater

will reengage.

C. Heater does not work. C. Replace heater.

Kohler Co. 13 1012295-2-E

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

No comments

Kohler K-1151-LA-0 Installation Guide Page 13