Kohler K-1166-C1-96 Installation Guide download pdf (Page 7)

2. Construct the Stud Framing

NOTICE: Provide unrestricted service access to the pump, in-line heater, adjustable feet, and control box.

You must construct an access panel to provide sufficient clearance for servicing the pump, in-line heater,

and control box.

Construct stud framing designed for your particular installation. The overﬂowing bath can be

installed in a deck mount installation.

Frame the ﬂoor, or construct a frame for a raised installation in accordance with the roughing-in

information.

When constructing the framing, allow for the thickness of sub and ﬁnished deck materials.

Framing should be of 2x4 construction.

For undermount installation, allow for the thickness of the planned deck material, and provide

proper support.

Do not support the bath by the rim.

When planning the stud framing, take into account the required 2″ (5.1 cm) air gap between the end

of the ﬁll spout and the top of the bathing well rim. Take into account the thickness of your planned

ﬁnished deck material, and construct the framing and deck material with this minimum air gap in

mind.

Deck

Kohler Co. 7 1054216-2-B

1 2 3 4 5 6 7 8 9 10 11 12 ... 63 64

No comments

Kohler K-1166-C1-96 Installation Guide Page 7