Kohler K-1168-GVBCW-96 Installation Guide download pdf (Page 12)

9. Complete the Finished Walls

Cover the framing with water-resistant material.

Provide suitable access to the control ampliﬁer.

Install the ﬁnished wall and deck materials.

Drill a 5/8″ (16 mm) hole through the wall material where the user interface will be installed. Refer

to the ″Plan the Installation″ section for the recommended location.

Drill a 5/8″ (16 mm) hole through the wall material where the user interface will be installed. Refer

to the ″Roughing-in - Required Components″ section to for the recommended location.

Route the user interface cable through the hole in the wall material, and tape or otherwise secure

the cable so it will not fall between the walls.

Seal the joints between the bath rim and the ﬁnished deck with silicone sealant.

Install the faucet trim.

Water-Resistant

Deck Material

5/8" (16 mm) User

Interface Hole

Finished Material

Apply silicone

sealant.

Silicone Sealant

24"

(610 mm)

10"

(254 mm)

1212241-2-A 12 Kohler Co.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 71 72

No comments

Kohler K-1168-GVBCW-96 Installation Guide Page 12