Kohler K-2971-KS-NA Installation Guide download pdf (Page 5)

2. Install the Valve - Single Showerhead Only

Install the valve on the support framing so the ″UP″ mark on the

valve is facing upward.

Connect the water supplies to the valve body using elbows, 3/4″

copper tubing or pipe, and adapters (if needed). Use thread

sealant on all threaded connections.

IMPORTANT! Secure the piping to the framing.

Temporarily install a 1/2″ nipple to the shower elbow so it

extends at least 2″ (5.1 cm) beyond the ﬁnished wall.

Hot Supply

72"-78"

(182.9 - 198.1 cm)

To Floor (Typical)

Temporary

Nipple

Cold

Supply

3/4" Adapter or

Solder Direct

3/4"

Elbow

3/4"

Copper

or Pipe

48" (122 cm)

To Floor

Kohler Co. 5 1150733-2-A

1 2 3 4 5 6 7 8 9 10 ... 39 40

No comments

Kohler K-2971-KS-NA Installation Guide Page 5