Kohler K-686 User Manual download pdf (Page 12)

Troubleshooting (cont.)

Troubleshooting Table

Symptoms Probable Cause Recommended Action

C. Pressure difference greater than

5 psi (34.5 kPa) between the hot

and cold supply lines.

C. Install pressure regulators to bring

the supplies with 5 psi (34.5 kPa)

of each other.

D. If none of the recommended

actions for the above issues

correct the symptom, the valve

requires servicing.

D. Contact your Kohler Co. authorized

service representative.

10. Water leaking from the

valve.

CAUTION: Risk of

personal injury or

product damage. Turn off

the main power and

water supply.

A. Connections are not secure. A. Check all connections. Make

adjustments as needed.

B. Seals are worn or damaged. B. Order a seal service pack and

replace all seals.

C. Internal leak. C. Unit requires overhaul. Contact

your Kohler Co. authorized service

representative.

11. Hot water only, the valve

shuts down.

A. Hot and cold lines are reversed. A. Switch hot and cold water supply

connections. Verify the hot water

supply is connected to the inlet

marked ″H″ and the cold water

supply is connected to the inlet

marked ″C.″

1043184-2-B 12 Kohler Co.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

No comments

Kohler K-686 User Manual Page 12