Kohler K-6546-3-47 Installation Guide download pdf (Page 13)

Undercounter/Solid Surface Installation (cont.)

Sand the edge of the cut-out to smooth the surface and remove

all saw marks. For laminate-type countertops, waterproof all

unprotected areas of wood.

Clean the top of the sink rim, making sure the surface is free

from debris. Clean the bottom of the countertop around the

cut-out area, making sure the surface is smooth and free of

defects.

Apply a generous bead of sealant around the sink rim where the

sink rim will contact the countertop.

Position the countertop over the sink, making sure the sealant

provides a complete seal between the sink rim and the bottom of

the countertop.

Immediately wipe away any excess sealant with a damp cloth.

Fill any voids between the rim and the countertop if needed.

Allow the sealant to cure for at least 30 minutes before

proceeding.

For undercounter installation, install the faucet to the sink and

countertop according to the manufacturer’s instructions.

Connect and tighten the trap to the strainer, and complete the

water supply connections to the faucet according to the

instructions packed with the faucet.

Run water into the sink and check for leaks.

Clean up with a non-abrasive cleaner.

Kohler Co. 13 1019950-2-B

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

No comments

Kohler K-6546-3-47 Installation Guide Page 13