search

Kohler K-1913-R-96 Installation Guide Page 39

  • Download
  • Add to my manuals
  • Print
  • Page
    / 136
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 38
Troubleshooting Procedures (cont.)
Symptoms Probable Causes Recommended Action
F. Error code in controller has
been activated (beeping sound
heard).
F1. Reset the controller. To do this;
lower the door
quickly tap the door switch 5
times
wait 3 seconds, then tap the
switch 11 times within a 5
second span
the controller should beep 3 to
5 times to indicate the issue
has been resolved, then go
quiet.
F2. If the error code is still activated or
reoccurs, unplug the power and
call the Customer Care Center
using the information provided on
the back page of this manual.
G. The drain valve is not working. G. Replace the drain valve or call the
Customer Care Center using the
information provided on the back
page of this manual.
H. The controller is not working. H. Replace the controller or call
Customer Care Center using the
information provided on the back
page of this manual.
11. The seal continuously
attempts to inflate while
bath is full.
A. The primary seal system is not
operating properly.
A. Call the Customer Care Center
using the information provided on
the back page of this manual.
B. The secondary seal systems are
not operating properly.
B. Call the Customer Care Center
using the information provided on
the back page of this manual.
C. The airline hose is pinched or
disconnected inside the door.
C. Call the Customer Care Center
using the information provided on
the back page of this manual.
D. The air pressure switch is not
working.
D. The air pressure switch needs to be
replaced. Call the Customer Care
Center using the information
provided on the back page of this
manual.
E. The compressor is damaged. E. The compressor needs to be
replaced. Call the Customer Care
Center using the information
provided on the back page of this
manual.
F. Error code in controller has
been activated (beeping sound
heard).
F1. Reset the controller. To do this;
lower the door
quickly tap the door switch 5
times
wait 3 seconds, then tap the
switch 11 times within a 5
second span
the controller should beep 3 to
5 times to indicate the issue
has been resolved, then go
quiet.
Kohler Co. 39 1128532-2-C
Page view 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 135 136

Comments to this Manuals

No comments
  • Broda Catena Anviz Jade Range BuildMark
  • Craftsman Edgers LG Tumble dryers Shuttle Mini PCs Mattel Skill games GE Deep fryers
  • Samsung T28E310EX Philips MCM166/12 Yamaha TSX-B15D Maytag MGC7430DB Whirlpool BSNF 8772 OX
  • LG GS155 User Manual Kodak M52 User Manual Audi SQ5 Service Manual Sony BDV-F7 User Manual