Kohler K-1913-R-96 Installation Guide download pdf (Page 8)

2. Install the Drain Lines and Rough Plumbing

All Installations

Plumbing Access Considerations

Conﬁrm adequate mounting and connection space exists for the faucet speciﬁed for your

installation.

If the unit is installed on a slab at a corner of the outside walls: Make connections to the

accessible end, or provide access to the plumbing connections if not able to do so through the front

access panel.

If the unit is installed on a slab back-to-back against the outside walls: Plan to provide adequate

access to the plumbing connections. Limited access is available through the access panel.

When the unit is installed where the drain connections are accessible from below: Connections

can usually be made from underneath the unit.

Install the Rough Plumbing

Install the plumbing lines following the valve and trim manufacturer’s instructions. Recommended

supply ﬁttings and locations are shown above.

Install the drip tray drain line.

Install the sidewall drain line.

Install the slotted overﬂow drain line.

Install the water supply line which will connect to the accumulator. Do not connect at this time.

Flush out the drains.

Drip Tray Drain

Mixing Valve

Transfer Valve

Accumulator

Handshower

Install the drain lines.

Sidewall

Bath Drain

Slotted

Overflow Drain

Install water accumulator line.

Accumulator

Fitting (supplied)

(not supplied)

3/4" NPT

Recommended Plumbing Configuration

46" (116.8 cm) From Subfloor Recommended

1128532-2-C 8 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 135 136

No comments

Kohler K-1913-R-96 Installation Guide Page 8