search

Kohler Bath Whirlpool K-812-H2 User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • TROUBLESHOOTING
    •
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 3
Operation
Power Turns the whirlpool pump on and off.
Up Arrow Increases the water flow.
Down Arrow Decreases the water flow.
Heater Automatically engages when the whirlpool pump is powered on. Press the heater button
once to turn the heater off. Press the button a second time to turn the heater back on.
Indicator Bar Displays the water flow volume.
Whirlpool
Turn the jet trim fully counterclockwise. Position the jet nozzles so they face down toward the basin.
NOTICE: Do not allow the water temperature in the whirlpool to exceed 104°F (40°C). The heater will
automatically maintain the water temperature when the whirlpool is running, as long as the water
temperature does not exceed 104°F (40°C). The heater will disengage at higher temperatures.
Close the drain, then fill the whirlpool to a level at least 2″ (5.1 cm) above the highest jet. Using
your hand, test the water temperature for comfort and safety. Carefully enter the bath.
Press the power icon to turn on the whirlpool pump and heater. Water will flow at medium volume.
Press the up or down arrow icons to increase or decrease the water flow. The indicator bar will
display the water flow volume.
Adjust the jets for optimum air/water mixture. Turn the jet trim clockwise to reduce the flow or
counterclockwise to increase the flow. If desired, position the jet nozzles to direct the water flow to
maximize your hydro-massage experience.
If desired, turn the heater off by pressing the heater icon. Press the button a second time to turn the
heater back on.
Press the power icon a second time to turn off the whirlpool pump and heater.
NOTE: The pump and heater will automatically stop after approximately 20 minutes of continuous
operation. If desired, press the power icon to reactivate the pump and heater.
Carefully exit the bath, then open the drain to empty the whirlpool.
NOTE: If the whirlpool is not operating properly, consult the ″Troubleshooting″ section of this guide
before calling a qualified service representative.
Indicator Bar -
Shows water
flow volume
Power On/Off
Heater On/Off
Heater Indicator Light
Increases Flow
Decreases Flow
Lighted User Keypad
Fill with water at least 2" (5.1 cm)
above the highest jet.
Turn the jet trim ring
clockwise to
decrease the flow.
Position the jet
nozzles to direct
the water flow as
desired.
Turn the jet trim ring counterclockwise
to increase the flow.
1019460-5-C 4 Kohler Co.
Page view 3
1 2 3 4 5 6 7 8 9 ... 47 48

Comments to this Manuals

No comments
Related products and manuals for Water equipment Kohler Bath Whirlpool K-812-H2
Water equipment Kohler Freewill Barier Free Bath Whirlpools K-12106-H User Manual   (16 pages)
Water equipment Kohler Purist Effervescent Bath K1191-LC User Manual   (16 pages)
Water equipment Kohler K-1111 User Manual     (60 pages)
Water equipment Kohler Bath Whirlpool K-870 User Manual   (20 pages)
Water equipment Kohler Bath Whirlpool K-812-N1 User Manual     (56 pages)
  • RME Audio Amplicon AMERICOM Starbucks Barista Derbi
  • Rolls Security device components HP Oxygen Equipment HoMedics Barbecues & grills Lantronix Unknown Olympus Battery chargers
  • Sony DSLR-A200K Grizzly G1023SLWX Auerswald COMfort 300
  • Avent SCF157/02 User Manual Dimplex DNV20CH Operations Instructions Crock-Pot Slow Cookers User Manual Samsung SAMSUNG S1060 User Manual Motorola DS3508 Specifications