Kohler Freewill Barier Free Bath Whirlpools K-12106-H User Manual download pdf (Page 15)

115982-2-BA (-)

Kohler Co., Kohler, WI

B. OPERATING SEQUENCE

Refer to the chart at right for the proper operating

sequence.

1. Turn on the whirlpool jets. Adjust each jet for

optimum air/water mixture.

2. A built-in timer automatically stops the motor after

approximately 20 minutes of operation.

3. A built-in heater automatically maintains the water

temperature while whirlpool bathing.

Reduce

Air and

Water

Add Air

and

Water

TO METHOD OBSERVE

Turn on

whirlpool

massage and

the heater.

Decrease flow by

pressing ↓ key;

increase flow by

pressing ↑ key.

To add air and

water to whirlpool

action, rotate

the trim ring

counterclockwise.

To reduce air and

water, rotate it

clockwise.

Shut off whirlpool.

Restart whirlpool

after 20 minute

cycle is

complete.

Up/

Down/

Less

14. TROUBLESHOOTING PROCEDURES

A. FLEXJET INSTALLATION

NOTE: The Flexjet O-ring must be correctly positioned,

must be lubricated, and must be in good condition to

permit easy rotation and proper operation.

1. Install the O-ring onto the first shoulder of the

Flexjet. Lubricate the O-ring with silicone lubricant

to prevent noisy operation of the Flexjet.

2. Insert the Flexjet into the housing, and lightly push

and rotate the Flexjet until it snaps into position. Do

not force the Flexjet.

NOTE: When installed correctly, the Flexjet should turn

smoothly both clockwise and counterclockwise.

Flexjet Housing

O-Ring (Must

Be Lubricated)

Flexjet

Slide O-Ring

1 2 ... 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Kohler Freewill Barier Free Bath Whirlpools K-12106-H User Manual Page 15

Comments to this Manuals

Related products and manuals for Water equipment Kohler Freewill Barier Free Bath Whirlpools K-12106-H