Installation GuidePurist™ Effervescent BathM product numbers are for Mexico (i.e. K-12345M)Los números de productos seguidos de M corresponden a Méxic
Test Run the Bath (cont.)Verify that the chromatherapy lights are operating. Upon start-up the lights should be changing throughthe color sequence. Pr
10. Complete the Finished Wall or DeckNOTICE: Provide unrestricted service access to the pump, in-line heater, and control box. You mustconstruct an a
13. Using Your BathFill the BathNOTE: Please read these steps carefully before you operate your bath.NOTE: The water temperature in the bath should no
14. Chromatherapy Light OperationThe submerged chromatherapy lights automatically turn on in the stationary setting when you start thebath.Press the “
1012493-2-A Kohler Co.
Kohler Co. 1012493-2-A
USA: 1-800-4-KOHLERMéxico: 001-877-680-1310Canada: 1-800-964-5590kohler.com©2002 Kohler Co.1012493-2-A
Important InformationWARNING: When using electrical products, basic precautions should always be followed, includingthe following:DANGER: Risk of elec
Important Product Information (cont.)Electrical RequirementsThe installation must have a Class A Ground-Fault Circuit-Interrupter (GFCI). The GFCI pro
Thank You For Choosing Kohler CompanyWe appreciate your commitment to Kohler quality. Please take a few minutes to review this manual beforeyou start
1. List of New TermsBathing well-The deep portion on the bath used by the bather.Bathing well rim-The high rim between the bathing well and the overflo
2. Roughing In InformationNOTICE: Unless otherwise specified, floor support under the bath must provide for a minimum of 80lbs./square foot (390 Kg./squ
3. Construct the Stud FramingNOTICE: Provide unrestricted service access to the pump, in-line heater and control box. You mustconstruct an access pane
6. Position the UnitCAUTION: Risk of product damage. Do not lift or support the unit by the pump or piping.With help, carefully lift the unit into pla
8. Make the Electrical ConnectionsNOTE: The product model number is printed on a label on the pump side of the unit. This label alsoidentifies the elec
Comments to this Manuals