Kohler Purist Effervescent Bath K1191-LC User Manual download pdf (Page 11)

10. Complete the Finished Wall or Deck

NOTICE: Provide unrestricted service access to the pump, in-line heater, and control box. You must

construct an access panel to provide sufficient clearance for servicing the pump, in-line heater, and control

box.

Protect the product surface. Cover the framing with water-resistant wall material.

Keep the entire overﬂow channel area exposed to allow access to the drain overﬂow, and to permit easy

cleaning of the overﬂow channel surfaces.

Seal the joints between the rim edge and the water-resistant wall or deck material with silicone sealant.

Tape and mud the water-resistant wall material.

Install the ﬁnished wall to the water-resistant wall material.

Seal the joints between the product rim and the ﬁnished wall material with silicone sealant.

11. Install the Faucet Trim

Install the faucet trim according to the instructions packed with the trim.

12. Clean-Up After Installation

When cleaning up after installation, do not use abrasive cleansers, as they may scratch and dull the bath

surface. Use warm water and a liquid detergent to clean the surface.

Remove stubborn stains, paint, or tar with turpentine or paint thinner. Do not allow cleaners containing

petroleum distillates to remain in contact with any bath surfaces for long periods of time. Remove

plaster by carefully scraping with a wood edge. Do not use metal scrapers, wire brushes, or other metal

tools. Use a powder-type detergent on a damp cloth to provide mild abrasive action to any residual

plaster.

Access Panel

Finished Deck

Material

Bath

Silicone

Sealant

Framing

Water–Resistant

Wall Material

Kohler Co. 11 1012493-2-A

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Kohler Purist Effervescent Bath K1191-LC User Manual Page 11