Kohler K-11281-CP Installation Guide download pdf (Page 4)

1. Prepare the Site — Wall Plate(s)

Determine the desired mounting location.

Remove the template from the packaging materials.

Position the template at the desired mounting location with the

printed template facing you. Make sure the larger hole is oriented

as shown in the illustration.

Level the template.

Tape the template to the wall. Verify that the center points on the

template are level and that the template is in the proper location.

2. Mark and Drill the Pilot Holes

Pilot hole locations are marked on the template.

Verify that the larger mounting hole printed on the template is

oriented as shown in the illustration.

If the installation requires multiple posts, conﬁrm that the center

points are even using a level.

NOTE: There is no provision for later adjustment if the center points

and resulting pilot holes for multiple post accessories are not level.

Select a drill and 5/16” drill bit that are appropriate for the wall

material you will be drilling through.

Carefully drill a 5/16” hole at all marked pilot hole locations.

Wall Plate Hole Locations

Wall Plate

Holes

Multiple-Post Accessory

Center-To-Center Points

Level

1036890-2-A 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 23 24

No comments

Kohler K-11281-CP Installation Guide Page 4