Kohler K-1418-H2 User Manual download pdf (Page 2)

Technical Information

Fixture*:

Basin area:

Bathing well 48″ (1219 mm) x 27″ (686 mm)

Top area 60″ (1524 mm) x 30″ (762 mm)

Weight 140 lbs (63.5 kg)

To overﬂow:

Water depth 16″ (406 mm)

Capacity 94 gal (355.8 L)

* Approximate measurements for comparison only.

Drop-in

cut-out

70-1/2″ (1791 mm) x 40-1/2″ (1029 mm)

Pump: kW V Hz A

Variable-

speed:

1.5 240 50/60 11

Required Electrical Service

Dedicated circuit required, protected with Class A

Ground-Fault Circuit-Interrupter (GFCI) or Residual

Current Device (RCD):

Pump/control 220/240 V, 20 A, 50/60 Hz

Installation Notes

Install this product according to the installation guide.

Floor support under whirlpool must provide for a minimum of

43 lbs/square foot (209 kg/square meter) loading.

Hot water supply should be 70% of capacity or greater.

Installations will vary.

If installing a rim-mount faucet, make sure there is no

interference with drain overﬂow and circulating system before

drilling any holes. Consult local and national codes for

minimum air gap requirements if installing a spout on the

faucet deck.

This whirlpool is designed for drop-in installation only. It is not

suited for use in a three-wall alcove with an overhead shower.

No change in measurements if connected with drain

illustrated. (K-7161-AF or K-7161M-AF)

Pump/Control

34" (864 mm) W x 15" (381 mm) H

1-1/16" (27 mm)

1-1/2" OD

11-3/4"

(298 mm)

42" (1067 mm)

5-1/4" (133 mm)

36" (914 mm)

72" (1829 mm)

2-7/8" (73 mm)

3" (76 mm)

20-1/8"

(511 mm)

3" (76 mm)

22"

(559 mm)

Product Diagram

MEMOIRS

6’ BATH WHIRLPOOL

Page2of2

1022383-4-

1 2

Comments to this Manuals

No comments

Kohler K-1418-H2 User Manual Page 2

Comments to this Manuals

Related products and manuals for Unknown Kohler K-1418-H2