Kohler K-124-4-BN Installation Guide download pdf (Page 5)

3. Complete the Valve Installation

NOTE: This section applies to all valve installation styles.

CAUTION: Risk of product damage. Remove the plaster guards,

valve units, and aspirator before applying heat to the yoke.

IMPORTANT! Use thread sealant on all threaded connections.

Remove the plaster guards, valve units, and aspirator.

Plumb using 1/2″ copper tubing, elbows, and adapters.

Reinstall the plaster guards, valve units, and aspirator.

Secure the bath and shower piping to the support framing and

install temporary nipples.

Install the provided plug in the appropriate valve body outlet if

the installation is for bath or shower only.

Close the valves (cold = counterclockwise, hot = clockwise).

Turn on the main water supply.

Turn on the water to ﬂush debris from valve and check for leaks.

Turn off water.

Complete the ﬁnished wall.

Elbow

Adapters

1/2" Copper

Tubing

1/2" Copper

Tubing

Temporary

Nipple

Temporary

Nipple

Kohler Co. 5 117061-2-A

1 2 3 4 5 6 7 8 9 10 ... 23 24

No comments

Kohler K-124-4-BN Installation Guide Page 5