Kohler K-T134-4D-CP Installation Guide download pdf (Page 7)

4. Install the Face Plate and Lever Handle

CAUTION: Risk of product damage to the K-306–KS valve

assembly. When using this valve in a ﬁberglass or acrylic

installation, use the Thin Wall Installation Kit (88526).

Remove and discard the plaster guard and/or dome, if installed.

Fit the faceplate and centering washer over the valve, and secure

with two screws.

Rotate the valve stem fully counterclockwise.

Lever Handle

Slide an O-ring fully onto the handle, and slide the insert over

the handle shank.

Fit the second O-ring over the handle shank. Secure with the

washer and nut.

Hand tighten the end cap to the handle.

Install the sleeve and bonnet to the valve stem.

Align the handle assembly, and secure the handle to the valve

stem with the screw.

Valve Stem

Faceplate

Screws

Centering Washer

Discard plaster

guard with dome.

Valve Stem

Short Sleeve

Handle Arm

Long Sleeve

O-Ring

Bonnet

Sleeve

Screw

Washer

End Cap

Center Cap

Kohler Co. 7 114497-2-CC

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

No comments

Kohler K-T134-4D-CP Installation Guide Page 7