Kohler 120V Bath with Airjets 1198326-2-A User Manual download pdf (Page 7)

3. Make the Electrical Connections – USA

WARNING: Risk of electric shock. Make sure the power has been disconnected before performing

the following procedures.

WARNING: Risk of electric shock. Connect the blower motor to a properly grounded,

grounding-type receptacle protected by a Ground-Fault Circuit-Interrupter (GFCI) or Residual

Current Device (RCD). Do not remove the grounding pin from the plug. Do not use a grounding

adapter.

NOTICE: The blower motor is equipped with a cord and plug. A qualiﬁed electrician must install a GFCI-

or RCD-protected, 120 V, 15 A, grounded outlet for the blower. No other load should be on this circuit.

Install an electrical outlet behind the bath, at least 1-1/2″ (38 mm) above the subﬂoor, and within

reach of the 24″ (610 mm) power cord.

Plug the blower into this outlet.

Install a GFCI-protected

120 V, 15 A grounded outlet.

Bond in accordance

with applicable codes.

Air Intake

24" (610 mm) Max. Distance

Between Blower and Outlet

Kohler Co. 7 1198326-2-A

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

No comments

Kohler 120V Bath with Airjets 1198326-2-A User Manual Page 7