Kohler K-1460 User Manual download pdf (Page 5)

1. Prepare the Site

Concrete Construction

NOTICE: Adequate ﬂoor support must be provided. Consult the roughing-in sheet packed with your

whirlpool for speciﬁc ﬂoor loading requirements.

NOTICE: Do not support the load weight of the whirlpool by the perimeter of the rim. To avoid damage

to product, support the whirlpool by its base or feet.

Make sure the ﬂooring offers adequate support for your whirlpool, and verify that the subﬂoor is

ﬂat and level.

This whirlpool may be installed next to the wall or in an island installation. An island installation

requires a four side surround. In both instances, make sure the deck is supported by brick or

concrete.

Install an access panel to allow the pump to be serviced.

Construct brick or concrete supports.

For all installations: To ensure the whirlpool does not rest on the rim, frame the ﬂoor or construct a

frame for a raised installation. Refer to the roughing-in information packed with this bath.

If an apron will be installed, construct the required additional support at this time. Refer to the

installation instructions packed with the apron.

Position the plumbing according to the roughing-in information packed with this bath. Cap the

supplies, and check for leaks.

Brick

Bath

Tile

Approved

Tile Backing

Typical

access

panel

Tile

Approved

Tile Backing

Brick

Whirlpool may be installed

next to the wall or as an

island installation.

Install an access panel to allow

the pump to be serviced.

Kohler Co. 5 1019749-2-M

1 2 3 4 5 6 7 8 9 10 ... 59 60

No comments

Kohler K-1460 User Manual Page 5