Kohler K-10103 User Manual download pdf (Page 13)

Troubleshooting (cont.)

Symptoms Probable

Causes

Recommended Action

D. The

solenoid

does not

work.

D. Remove the valve cover and

solenoid. Replace the solenoid

as needed. Refer to the ″Test

and Service the Solenoid″

section of the Homeowners

Guide.

E. The ﬁlters

are

plugged.

E. Refer to the ″Service the Filters″

section of the Homeowners

Guide.

4. Sporadic

water ﬂow.

A. The wires

are

pinched or

damaged.

A. Remove the cover and inspect

the wires/cables for cuts or

damage. If the wires are cut or

damaged, order a new

solenoid, sensor assembly,

sensor extension cable, or

battery holder. Do not pinch or

damage the wires during

reassembly.

B. The

battery life

has

expired.

B. Remove the valve cover and

replace the battery. The spout

requires a standard 2CR5 6 V

lithium battery. This item is not

available from Kohler Co., but

can be purchased at retail

stores.

5. Sensor

ﬂashes once

approximately

every 8

seconds. The

product

continues to

operate.

A. The

battery

power is

low.

A. Replace the battery. The

product may continue to

operate for several days with

low battery power. The product

requires a 2CR5 6 V lithium

battery. This item is not

available from Kohler Co. but

can be purchased at a local

retail store.

6. Sensor

ﬂashes once

approximately

every 2

seconds. The

product does

not operate.

A. The

battery

power is

insufficient

to allow

the

product to

operate.

A. Replace the battery. The

product requires a 2CR5 6 V

lithium battery. This item is not

available from Kohler Co. but

can be purchased at a local

retail store.

Kohler Co. 13 1056542-2-B

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Comments to this Manuals

No comments