Kohler K-11748-K-NA Installation Guide download pdf (Page 7)

Prepare the Valve

IMPORTANT! The internal components of the valve will only need to be removed

for back-to-back installations (reversed valve only) or installations that require

soldering of connections.

NOTE: Only valves with stops will include the stop assembly.

Solder Installations Only

IMPORTANT! The internal components of the valve will only need to be removed

for back-to-back installations (reversed valve only) or installations that require

soldering of connections.

Remove the plaster guard (not shown).

Remove all internal valve components as shown and set aside.

Back-to-Back Installations Only

Remove the plaster guard (not shown).

For the reversed valve, remove all internal valve components as shown and set

aside. The stop assembly does not need to be removed from the valve if soldering

is not needed.

Préparer la valve

IMPORTANT! Les composants internes de la valve doivent seulement être retirés

pour les installations dos à dos (valve inversée seulement) ou les installations qui

nécessite le soudage des connexions.

REMARQUE: Seulement les valves munies de butées incluent l’ensemble de butées.

Installations avec soudure seulement

IMPORTANT! Les composants internes de la valve doivent seulement être retirés

pour les installations dos à dos (valve inversée seulement) ou les installations qui

nécessite le soudage des connexions.

Stop Assembly

Ensemble d'arrêt

Montaje de llave de paso

Kohler Co. 7 1128093-2-C

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

No comments

Kohler K-11748-K-NA Installation Guide Page 7