Kohler K-12183-BN Installation Guide download pdf (Page 7)

5. Optional Temperature Limiting Adjustment

NOTE: Prior to adjustment, make sure the handle is in the

maximum hot position.

Remove the cap, handle and bonnet.

Turn on the water to the maximum hot water temperature by

pushing the valve stem up, and turning it fully clockwise.

Use a pencil or marker to mark the current position of the

temperature stop tab (top edge) on the mounting nut. Lift both

the indexer and the top disc just enough to clear the splines and

to allow rotation.

NOTE: Each indexer notch is an average 9.5°F (5.3°C) change in

temperature.

Turn the indexer, top disc, and valve stem counterclockwise until

you achieve the desired temperature.

Reinstall the indexer and top disc to the valve. Make sure the top

disc is snapped fully into the indexer.

Turn off the water, and reinstall the bonnet, handle and cap.

Mounting

Nut

Top Disc

Splines

Stop Tab

Bonnet

Handle

Screw

Cap

Valve Stem

Kohler Co. 7 1011034-2-F

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Kohler K-12183-BN Installation Guide Page 7