Kohler K-3588-47 Installation Guide download pdf (Page 9)

4. Install the Tank

Position the sealing ring on the valve nut.

Thread the supplied supply hose onto the water inlet on the

bottom of the tank.

Position the tank on the bowl, aligning the carriage bolts with the

corresponding holes in the bowl and running the supply hose

through the corresponding hole.

Thread the two supplied bolts into the bowl through the bolt

holes in the bottom of the tank.

Slide a metal washer and rubber washer onto the bolts.

CAUTION: Risk of product damage. Overtightening may

cause breakage or chipping of the vitreous china.

Tighten the bolts using a screwdriver. Do not overtighten.

Turn the water on (There is a shut-off valve in the toilet tank that

should already be in the closed position. Turn it off if the tank

begins to ﬁll) and check for leaks.

Washer

Metal Washer

Rubber Washer

Nut

Valve Nut

Sealing Ring

Supply Hose

Kohler Co. 9 1095641-2-B

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

No comments

Kohler K-3588-47 Installation Guide Page 9