Kohler K-4709-0 Installation Guide download pdf (Page 5)

1. Install an Electrical Outlet

WARNING: Risk of electric shock, ﬁre, or personal injury. This

product must be grounded. Connect only to a dedicated 120

VAC, 60 Hz circuit protected by a minimum 15 Amp

Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage

Circuit-Breaker (ELCB).

Do not use an extension cord with the product.

NOTE: Follow local codes when determining the electrical outlet

location.

Route the electrical and install to a 120 V GFCI- or

ELCB-protected receptacle. The electrical outlet should be located

within 12″ (30.5 cm) of the toilet to accommodate the length of

the power cord.

2. Preparation

Remove the existing toilet seat.

Turn off the water supply to the toilet.

Flush the toilet to relieve any pressure from the water supply

hoses.

Position a container under the ﬁll valve to catch any excess water.

Disconnect the water supply hose from the toilet ﬁll valve.

Supply Stop

GFCI-Protected

Receptacle

Kohler Co. 5 1054180-2-E

1 2 3 4 5 6 7 8 9 10 ... 31 32

No comments

Kohler K-4709-0 Installation Guide Page 5