Kohler K-7344-4-S Installation Guide download pdf (Page 3)

1. Install the Assembly

IMPORTANT! This procedure must be followed to ensure proper

installation and handle operation.

Turn the handle counterclockwise to the closed position.

Remove the valve body from the assembly.

Insert the O-ring into the groove of the escutcheon.

Slide the escutcheon with O-ring onto the assembly.

Insert the assembly through the mounting hole.

With the handle still in the closed position, turn the entire

assembly in the mounting hole until the handle is pointing in the

desired closed position.

From underneath the sink, securely hand tighten the nut onto the

assembly.

With the handle still in the closed position, line up the notch on

the valve body with the notch on the assembly, then slide them

together.

Fasten the valve body and assembly together with two thumb

screws. Do not overtighten the thumb screws.

Handle

Assembly

Escutcheon

O-Ring

Nut

Valve Body

Align

notches.

Thumb

Screws

Kohler Co. 3 1069077-2-A

1 2 3 4 5 6 7 8 ... 19 20

No comments

Kohler K-7344-4-S Installation Guide Page 3