Kohler K-R10434-N-BN Installation Guide download pdf (Page 4)

2. Install the Faucet

IMPORTANT! When mounting the faucet to uneven surfaces, such

as tile grout lines, apply a suitable sealant in addition to the gasket

provided. The sealant will reduce the risk of water seepage under

the faucet.

Slide the escutcheon and gasket to the spout.

Partially thread two screws into the threaded ring until they

protrude slightly from the backside of the threaded ring.

Apply thread sealant to the spray hose outlet threads.

Slide the threaded ring and metal washer onto the handspray

hose.

Run the handspray hose up through the spout mounting hole,

then connect and tighten the handspray hose to the spray hose

outlet.

Position the spout in the desired mounting position.

Slide the metal washer onto the shank from the underside of the

sink.

Thread the ring up the shank until it is about 1/4″ (6 mm) away

from the underside of the sink. Ensure the screw holes face the

front and back of the faucet.

Tighten the screws.

Spout

Handspray

Sink

Escutcheon

Washer

Ring

Screws

Gasket

Spray Hose

Outlet

1036178-2-F 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 27 28

No comments

Kohler K-R10434-N-BN Installation Guide Page 4