Kohler K-T11077-4-BN Installation Guide download pdf (Page 2)

IMPORTANT INSTRUCTIONS

WARNING: Risk of scalding or other severe injury.

•

Before completing installation, the installer must set the maximum water

temperature setting of this valve to minimize the risks associated with scalding

hazards according to ASTM F 444.

•

Do not install a shut-off device on either outlet of this valve. The installation of

any such device may create a cross-ﬂow condition at the valve and affect the

water temperature.

•

Factors that change the temperature of the water supplied to the valve, such as

seasonal water temperature changes, and water heater replacement or servicing,

will change the maximum water temperature supplied by the valve and may

create a scalding hazard. The pressure-balanced valve will not compensate for

changes in the water supply temperature; adjust the maximum water temperature

setting of this pressure-balanced valve when such changes occur.

•

Pressure-balanced valves may not provide protection against scalding if there is a

failure of other temperature-limiting devices elsewhere in the plumbing system.

NOTICE: Only apply silicone based lubricants to these valves. Do not use petroleum

based lubricants. Petroleum based lubricants will harm the O-rings, seals, and plastic

components.

The installer is responsible for installing the valve and adjusting the maximum water

temperature of this pressure-balanced valve according to instructions.

This valve meets or exceeds ANSI A112.18.1 and ASSE 1016.

If you do not understand any of the installation or temperature adjustment instructions

in this document, in the United States please contact our Customer Service Department

at 1-800-4-KOHLER. Outside the U.S., please contact your distributor.

IMPORTANT NOTICE TO INSTALLERS! Please ﬁll in the blanks in the adjacent box

and on the valve label. Then insert these instructions into the plastic bag included with

the valve package, and attach the plastic bag to the valve handle for the homeowner’s

reference.

NOTICE TO HOMEOWNERS! This device has been preset by _______________________

of _______________________________ to ensure a safe maximum temperature. Any

change in the setting may raise the discharge temperature above the limit considered

safe, and lead to scalds.

Date: ______________

INSTRUCTIONS IMPORTANTES

AVERTISSEMENT: Risque de brûlures ou autres blessures graves.

•

Avant de commencer l’installation, l’installateur doit régler la température

maximale de l’eau de cette valve pour réduire au minimum les risques de

brûlures, ceci conformément à la norme ASTM F 444.

•

Ne pas installer un dispositif d’arrêt sur les sorties de cette valve. L’installation

d’un tel dispositif peut créer une condition de débit croisé au régulateur et

modiﬁer la température de l’eau.

•

Les facteurs qui changent la température de l’eau fournie à cette valve, tels que les

changements de température d’eau saisonniers, et le remplacement ou l’entretien

du chauffe-eau, changeront la température maximale de l’eau fournie par le

régulateur et pourront présenter un danger de brûlures. La valve à pression

régulée ne compensera pas les changements de température d’alimentation d’eau;

ajuster la température maximale de cette valve à pression équilibrée si de tels

changements se produisent.

1072956-2-B 2 Kohler Co.

1 2 3 4 5 6 7 ... 23 24

Comments to this Manuals

No comments

Kohler K-T11077-4-BN Installation Guide Page 2

Comments to this Manuals

Related products and manuals for Sanitary ware Kohler K-T11077-4-BN