Kohler K-T12021-4-CP Installation Guide download pdf (Page 8)

4. Install the Faceplate and Handle

Remove and discard the plaster guard and/or dome, if installed.

Rotate the valve stem fully counterclockwise.

Install the faceplate onto the valve. Secure with two screws. Do

not overtighten.

Install the graphics ring to the faceplate, and rotate it clockwise to

lock it in place.

Align the handle with the lever facing down.

Secure the handle with a washer and screw.

Press the plug button ﬁrmly into place, aligning the tab with the

notch in the handle.

Fit the sleeve onto the valve.

5. Complete the Installation

Turn the valve fully counterclockwise to the off position.

Remove the aerator assembly from the spout by turning it

counterclockwise.

Turn on the main water supply.

Turn the valve to the center and run water for approximately one

minute to ﬂush the system.

Check all connections for leaks.

Reinstall the aerator.

Sleeve

Graphic Ring

Faceplate

Screw

Insert

Washer

Handle

Valve

Stem

Plug

Button

Discard plaster guard

with dome.

1031258-2-B 8 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

No comments

Kohler K-T12021-4-CP Installation Guide Page 8